Primary Gyratory Crusher Parts Primary Gyratory Crusher Parts,Crusher Price List Liners,Gyratory Crusher Parts,Excavator Spare Liners Wuyi Slon Machinery Co.,Ltd , https://www.slonmachinery.cn
First: daily maintenance content
Visual inspection Before leaving the car, look around at the car to see if there is any damage to the lighting device, whether the body is tilted, or if there is any leakage or leakage.
Check the appearance of the tire;
Check the condition of the doors, engine compartment cover, access cover, and glass.
Signal device check Turn on ignition switch key (do not start the engine), check the lighting of each warning light and indicator light, start the engine to check whether each warning light goes out normally and the indicator light is still on.
Fuel Check Check the gauge's instructions to supplement the fuel.
Second: weekly maintenance content
The tire pressure check adjusts the tire pressure and cleans up the debris on the tire.
Don't forget to check your spare tire. The engine and various oils check the fixing of engine components, and check whether there is any oil leakage or water leakage in each joint surface of the engine.
Check the adjustment of the tightness of the belt; check the fixing of pipelines and wires in various parts; check the supplementary oil to check the supplementary coolant; check the supplementary electrolyte; check the supplementary power steering oil; clean the radiator surface; add windshield washer fluid, etc.
Clean and clean the interior of the car and clean the exterior of the car.
Third: monthly maintenance content
External inspection of the car, check the damage of the lamp and lampshade;
Check the fixing of the body trim; check the condition of the mirror. Tires Check the wear of the tires and clear the luggage compartment. When you approach the tire's wear sign, you should replace the tires to check if the tires have bulges, abnormal main wear, aging cracks, and hard injuries.
Clean waxing thoroughly cleans the interior of the car; clean the exterior of the tank, the exterior of the oil radiator, and the debris on the exterior of the air conditioner radiator.
Chassis inspection chassis there is no oil leakage phenomenon, found that there are traces of oil leakage, should check the gear oil of each assembly and make appropriate replenishment, all the nozzles on the chassis to fully replenish grease operation.
Other carefully repeated weekly maintenance content.
Fourth: maintenance contents every six months
The exterior of the engine is cleaned by the engine, and the water-repellent treatment of the electrical parts is to be observed during cleaning. If the electrical part has a high requirement for waterproofing, the high-pressure, high-temperature water gun should be avoided from flushing the engine. You can use a brush to dip the cleaning agent to clean the engine's appearance.
The distributor wipes the dirt in the distributor cap with a clean rag, removes dirt from the distributor contacts, eliminates traces of contact erosion, checks high-speed contact gaps or pole gaps in the electronic ignition system, and lubricates the distributor Each lubrication point.
The third filter oil uses compressed air to blow off dust from the air cleaner; timely replacing the fuel filter and cleaning the strainer of the pipe joint; replacing the oil and oil filter. For domestic cars, the oil filter, fuel pre-filter and centrifugal fine filter should also be cleaned.
The battery inspects the battery terminal part for corrosion. Rinse the battery with hot water and remove the corrosion from the battery terminal. Measure and adjust the electrolyte proportion of the battery.
Coolant Check for supplemental coolant and clean water tank appearance. Tire wheels check the wear of the tire and perform transposition on the tire.
Check the hub and bearing preload conditions. If there is any gap, adjust the preload.