3-Piece Can Making Line,Can Making Line,Tin Can Making Machine Production Line,Tin Can Production Line Zhoushan Longwen Machinery Technology Co., Ltd. , https://www.longwenmachinery.com
Many automatic car owners have added care when buying a new car. However, once the warranty period expires, it is too lazy to ascertain how to inspect, maintain, and maintain the vehicle: “The car can be opened and cannot be repaired.†When an accident occurs, the vehicle is repaired and repaired, resulting in automatic failure. The transmission's glitch expanded and deteriorated, causing a major accident.
How do you maintain the automatic transmission model?
1. Always check whether the automatic transmission fluid level is normal. The inspection method of the automatic transmission oil is different from that of the engine oil. The engine oil is checked in the cold state and the transmission oil is required to preheat the oil to about 50°C. The gear lever is then placed in the parking gear for 2 seconds at each gear position. At this time, the normal oil level of the dipstick should be located between the highest and lowest line. If not, add the same quality oil product in time.
2. Grasp the cycle of automatic transmission oil change The internal control mechanism of the automatic transmission is very precise, with a small gap, so most manufacturers recommend that the automatic oil change interval is generally two years or 4 to 60,000 kilometers. In the process of being used, the operating temperature of the transmission oil is generally around 120 degrees Celsius, so the quality of the oil is very high and must be kept clean. Secondly, when the transmission oil is used for a long time, grease may be generated, and sludge may be formed, which will increase the wear of the friction plates and parts, and also affect the system oil pressure, so that power transmission is affected. Third, the sludge in the dirty oil will make the movement of the valve body in each valve body unfavorable, and the hydraulic pressure control will be affected, thereby causing an abnormality in the automatic transmission.
3. The correct oil change method is to replace the transmission oil properly. The oil change method is dynamic oil change. Special gearbox cleaning equipment is used. During the operation of the gearbox, the old oil is fully circulated, and the new oil is added after the clean discharge. Case oil, so that the oil change rate of up to 90 or more, to ensure a good oil change effect.
Owners should cultivate awareness of active inspection, maintenance, and maintenance. They can learn some basic knowledge of maintaining and maintaining vehicles, carefully read the instructions for using the vehicle, and remember some necessary data. Scientific vehicle maintenance can ensure that vehicles are in good technical condition and ensure driving safety.