Mi600 Truck Bearing One Way Bearing From China Manufacturer

Model NO.: MI600

Torque Capacity: 3140nm

Inner Race Overrunning Speed: 50r/Min

Max Indexing: 300cycle/Min

Inner Diameter: 50mm

Outer Diameter: 136mm

Keyway: 12X3.5(mm)

Width: 95mm

Wight: 8.6kg

OEM: Accept

Trademark: SUMA or OEM

Transport Package: Industry Packing

Specification: mg, ma, mi, mo, mr

Origin: Changzhou

HS Code: 84836000

Model NO.: MI600

Torque Capacity: 3140nm

Inner Race Overrunning Speed: 50r/Min

Max Indexing: 300cycle/Min

Inner Diameter: 50mm

Outer Diameter: 136mm

Keyway: 12X3.5(mm)

Width: 95mm

Wight: 8.6kg

OEM: Accept

Trademark: SUMA or OEM

Transport Package: Industry Packing

Specification: mg, ma, mi, mo, mr

Origin: Changzhou

HS Code: 84836000
Â Â Â Â Â Â Â Â Â Â Â Â MI600 truck bearing one way bearing from China manufacturer

Intorduction
Type MG, MI, MO, MR is a sealed, sprag type freewheel, bearing supported using two 60...ZZ series grease lubricated bearings.
Units are delivered grease lubricated ready for installation. SMZ units are intended as multipurpose, to be used in various applications. The inner race is keyed to the shaft. The inside diameter of the outer race (dimension D4) should be used as the mounting register for the connected parts (sprocket, pulley, gear,
Torque arm...).

Feature
1.MGÂ SeriesÂ CamÂ ClutchÂ isÂ usedÂ forÂ innerÂ raceÂ overrunningÂ applications.Â MIÂ SeriesÂ CamÂ ClutchÂ isÂ usedÂ forÂ indexingÂ applications
2.Â ForÂ attachingÂ aÂ pulley,Â aÂ gear,Â orÂ sprocketÂ toÂ theÂ clutch,Â insertÂ theÂ clutchÂ intoÂ theÂ hubÂ ofÂ theÂ device,Â andÂ screwÂ theÂ boltsÂ (highÂ tension)Â intoÂ theÂ tappedÂ holesÂ onÂ theÂ clutchÂ end.Â TheÂ toleranceÂ boreÂ ofÂ theÂ hubÂ shouldÂ beÂ H6Â orÂ H7Â ofÂ JISÂ standard
3.Â RecommendedÂ shaftÂ tolerancesÂ areÂ asÂ follows:
4.Â TheÂ keyÂ shouldÂ beÂ inÂ accordanceÂ withÂ JISÂ B1301-1959.Â However,Â forÂ M750Â andÂ aboveÂ models,Â aÂ keyÂ isÂ attached.
5.Â UseÂ onlyÂ aÂ parallelÂ keyÂ toÂ secureÂ theÂ clutch.Â NeverÂ useÂ aÂ taperedÂ key.
6.Â IfÂ theÂ clutchÂ receivesÂ shockÂ loadsÂ orÂ isÂ designedÂ forÂ useÂ atÂ fullÂ torqueÂ capacity,Â itÂ isÂ betterÂ toÂ useÂ a
hardenedÂ keyÂ andÂ shaft.
7.Â AllowÂ forÂ aÂ clearanceÂ betweenÂ theÂ topÂ ofÂ theÂ clutchÂ keywayÂ andÂ theÂ topÂ ofÂ theÂ keyÂ forÂ pressureÂ ventilationÂ ofÂ theÂ clutchÂ inÂ theÂ caseÂ ofÂ MGÂ Series.Â AÂ pressureÂ ventilationÂ holeÂ isÂ providedÂ onÂ theÂ keywayÂ ofÂ theÂ clutchÂ innerÂ race.
8.Â WhenÂ mountingÂ theÂ clutchÂ onÂ aÂ shaft,Â applyÂ pressureÂ toÂ theÂ innerÂ race,Â butÂ neverÂ toÂ theÂ outerÂ race.
9.Â ThrustÂ loadÂ shouldÂ beÂ takenÂ upÂ byÂ otherÂ devices,Â notÂ byÂ theÂ CamÂ Clutch.
10.WhenÂ usingÂ MGÂ SeriesÂ atÂ mediumÂ andÂ highÂ speeds,Â payÂ attentionÂ toÂ heating.Â LongevityÂ isÂ shortenedÂ if
theÂ temperatureÂ ofÂ CamÂ ClutchÂ outerÂ raceÂ risesÂ toÂ overÂ 70Â°C.Â InÂ caseÂ ofÂ continuousÂ overÂ running
PleaseÂ contactÂ Tubaki.Â InÂ thisÂ case,Â useÂ aÂ differentÂ modelÂ orÂ provideÂ anÂ oilÂ bathÂ orÂ forcedÂ lubrication.
11.OilÂ isÂ notÂ sealedÂ inÂ atÂ theÂ timeÂ ofÂ shipment.Â SupplyÂ anÂ appropriateÂ amountÂ ofÂ oilÂ beforeÂ use.
12.WhenÂ placingÂ anÂ orderÂ forÂ MGÂ SeriesÂ CamÂ ClutchÂ modelÂ MGÂ 750Â andÂ above,Â pleaseÂ informÂ ofÂ theÂ overrunningÂ speedÂ youÂ use.
13.ForÂ verticalÂ mounting,Â pleaseÂ consultÂ .

Different Sizes for Your Reference
dimensions in mm

Model
Torque
Capacity
(N@m)
Drag
Torque
(N@m) Max.
Overrunning
(r/min)
Max.
Indexing
(cycle/min)
BoreÂ Â Size

A

B

C
PCD

E

InnerÂ Â Race OuterÂ Â Race Dia.
(H7) Keyway (h7) D

MGÂ 300
MIÂ Â 300 314 0.23
0.31 2800
50 900
_ _
300 19 5x2 63 77 60 66 10.4

MGÂ Â 400
MIÂ Â Â Â 400 539 0.29
0.38 2600
50 800
_ _
300 22 5x2 70 88 67 73 10.7

MGÂ Â 500
MIÂ Â Â 500 1620 0.51
0.68 2400
50 800
_ _
300 31.5 7x3 89 108 86 92 12.3

MGÂ Â 600
MIÂ Â Â 600 3140 0.85
1.54 2100
30 700
_ _
300 50 12x3.5 95 136 92 120 12.8

MGÂ Â 700
MIÂ Â Â 700 5880 1.70
2.63 1500
30 500
_ _
300 70 18x6 127 180 124 160 19.8

MGÂ Â 750
MIÂ Â Â 750 9500 3.43
4.12 1800
30 600
_ _
300 85 24x6 153 200 150 175 75

MGÂ Â 800
MIÂ Â Â 800 17600 5.39
8.33 1300
20 475
_ _
300 110 28x7 158 250 155 220 77.5

MGÂ Â 900
MIÂ Â Â 900 24500 6.77
9.41 1200
20 400
_ _
300 135 35x9 165 300 160 265 80

MGÂ Â 1000
MIÂ Â Â 1000 33800 8.14
12.74 1200
20 325
_ _
300 160 38x10 188 370 180 325 90

MGÂ Â 1100
MIÂ Â Â Â 1100 78400 15.00
22.15 350
20 _
_ _
150 185 45x14 260 470 250 415 125

MGÂ Â 1200
MIÂ Â Â Â 1200 95100 17.64
27.54 300
20 _
_ _
150 200 45x14 260 500 250 440 125

MGÂ Â 1300
MIÂ Â Â Â 1300 176000 18.72
28.13 250
20 _
_ _
150 250 56x17.5 280 600 260 530 130

Company Information
Changzhou Suma Precision Machinery Co., Ltd(Changzhou Tianniu Clutch Factory)is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and other bearings with high technology.

We are followingÂ "Best Quality, Best Price, Fast Delivery, Best Serves"Â to make all of our old and new customers satisfied.Â
Our Advantages
1. Advanced producing equipment.
2. Strict requirement for the raw material
3. Complete&perfect process flow
4. Good quality of each batch of the product
5. Different grades of price for different quality

FAQ
Q: Why do we choose your company?
A: We always insist quality first. We have our bearing factory, therefore we have advantage in quality control and price of one way clutch bearing.
Â
Q:What is the delivery time?
A: Most of the bearing we have stock. For small quantity, we will arrange delivery within 15 days.
Â
Q: What is your payment term?
A: Our payment term include L/C, T/T, Western Union, Paypal etc.
Â
Q: Can you send bearing samples first?
A: Yes, we can send bearing samples of one way clutch bearing to check quality first.

If you have any needs,pls contact me at any time! Â Â Â Â Â Â Â Â Â Â Â Â MI600 truck bearing one way bearing from China manufacturer

Intorduction
Type MG, MI, MO, MR is a sealed, sprag type freewheel, bearing supported using two 60...ZZ series grease lubricated bearings.
Units are delivered grease lubricated ready for installation. SMZ units are intended as multipurpose, to be used in various applications. The inner race is keyed to the shaft. The inside diameter of the outer race (dimension D4) should be used as the mounting register for the connected parts (sprocket, pulley, gear,
Torque arm...).

Feature
1.MGÂ SeriesÂ CamÂ ClutchÂ isÂ usedÂ forÂ innerÂ raceÂ overrunningÂ applications.Â MIÂ SeriesÂ CamÂ ClutchÂ isÂ usedÂ forÂ indexingÂ applications
2.Â ForÂ attachingÂ aÂ pulley,Â aÂ gear,Â orÂ sprocketÂ toÂ theÂ clutch,Â insertÂ theÂ clutchÂ intoÂ theÂ hubÂ ofÂ theÂ device,Â andÂ screwÂ theÂ boltsÂ (highÂ tension)Â intoÂ theÂ tappedÂ holesÂ onÂ theÂ clutchÂ end.Â TheÂ toleranceÂ boreÂ ofÂ theÂ hubÂ shouldÂ beÂ H6Â orÂ H7Â ofÂ JISÂ standard
3.Â RecommendedÂ shaftÂ tolerancesÂ areÂ asÂ follows:
4.Â TheÂ keyÂ shouldÂ beÂ inÂ accordanceÂ withÂ JISÂ B1301-1959.Â However,Â forÂ M750Â andÂ aboveÂ models,Â aÂ keyÂ isÂ attached.
5.Â UseÂ onlyÂ aÂ parallelÂ keyÂ toÂ secureÂ theÂ clutch.Â NeverÂ useÂ aÂ taperedÂ key.
6.Â IfÂ theÂ clutchÂ receivesÂ shockÂ loadsÂ orÂ isÂ designedÂ forÂ useÂ atÂ fullÂ torqueÂ capacity,Â itÂ isÂ betterÂ toÂ useÂ a
hardenedÂ keyÂ andÂ shaft.
7.Â AllowÂ forÂ aÂ clearanceÂ betweenÂ theÂ topÂ ofÂ theÂ clutchÂ keywayÂ andÂ theÂ topÂ ofÂ theÂ keyÂ forÂ pressureÂ ventilationÂ ofÂ theÂ clutchÂ inÂ theÂ caseÂ ofÂ MGÂ Series.Â AÂ pressureÂ ventilationÂ holeÂ isÂ providedÂ onÂ theÂ keywayÂ ofÂ theÂ clutchÂ innerÂ race.
8.Â WhenÂ mountingÂ theÂ clutchÂ onÂ aÂ shaft,Â applyÂ pressureÂ toÂ theÂ innerÂ race,Â butÂ neverÂ toÂ theÂ outerÂ race.
9.Â ThrustÂ loadÂ shouldÂ beÂ takenÂ upÂ byÂ otherÂ devices,Â notÂ byÂ theÂ CamÂ Clutch.
10.WhenÂ usingÂ MGÂ SeriesÂ atÂ mediumÂ andÂ highÂ speeds,Â payÂ attentionÂ toÂ heating.Â LongevityÂ isÂ shortenedÂ if
theÂ temperatureÂ ofÂ CamÂ ClutchÂ outerÂ raceÂ risesÂ toÂ overÂ 70Â°C.Â InÂ caseÂ ofÂ continuousÂ overÂ running
PleaseÂ contactÂ Tubaki.Â InÂ thisÂ case,Â useÂ aÂ differentÂ modelÂ orÂ provideÂ anÂ oilÂ bathÂ orÂ forcedÂ lubrication.
11.OilÂ isÂ notÂ sealedÂ inÂ atÂ theÂ timeÂ ofÂ shipment.Â SupplyÂ anÂ appropriateÂ amountÂ ofÂ oilÂ beforeÂ use.
12.WhenÂ placingÂ anÂ orderÂ forÂ MGÂ SeriesÂ CamÂ ClutchÂ modelÂ MGÂ 750Â andÂ above,Â pleaseÂ informÂ ofÂ theÂ overrunningÂ speedÂ youÂ use.
13.ForÂ verticalÂ mounting,Â pleaseÂ consultÂ .

Different Sizes for Your Reference
dimensions in mm

Model
Torque
Capacity
(N@m)
Drag
Torque
(N@m) Max.
Overrunning
(r/min)
Max.
Indexing
(cycle/min)
BoreÂ Â Size

A

B

C
PCD

E

InnerÂ Â Race OuterÂ Â Race Dia.
(H7) Keyway (h7) D

MGÂ 300
MIÂ Â 300 314 0.23
0.31 2800
50 900
_ _
300 19 5x2 63 77 60 66 10.4

MGÂ Â 400
MIÂ Â Â Â 400 539 0.29
0.38 2600
50 800
_ _
300 22 5x2 70 88 67 73 10.7

MGÂ Â 500
MIÂ Â Â 500 1620 0.51
0.68 2400
50 800
_ _
300 31.5 7x3 89 108 86 92 12.3

MGÂ Â 600
MIÂ Â Â 600 3140 0.85
1.54 2100
30 700
_ _
300 50 12x3.5 95 136 92 120 12.8

MGÂ Â 700
MIÂ Â Â 700 5880 1.70
2.63 1500
30 500
_ _
300 70 18x6 127 180 124 160 19.8

MGÂ Â 750
MIÂ Â Â 750 9500 3.43
4.12 1800
30 600
_ _
300 85 24x6 153 200 150 175 75

MGÂ Â 800
MIÂ Â Â 800 17600 5.39
8.33 1300
20 475
_ _
300 110 28x7 158 250 155 220 77.5

MGÂ Â 900
MIÂ Â Â 900 24500 6.77
9.41 1200
20 400
_ _
300 135 35x9 165 300 160 265 80

MGÂ Â 1000
MIÂ Â Â 1000 33800 8.14
12.74 1200
20 325
_ _
300 160 38x10 188 370 180 325 90

MGÂ Â 1100
MIÂ Â Â Â 1100 78400 15.00
22.15 350
20 _
_ _
150 185 45x14 260 470 250 415 125

MGÂ Â 1200
MIÂ Â Â Â 1200 95100 17.64
27.54 300
20 _
_ _
150 200 45x14 260 500 250 440 125

MGÂ Â 1300
MIÂ Â Â Â 1300 176000 18.72
28.13 250
20 _
_ _
150 250 56x17.5 280 600 260 530 130

Company Information
Changzhou Suma Precision Machinery Co., Ltd(Changzhou Tianniu Clutch Factory)is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and other bearings with high technology.

We are followingÂ "Best Quality, Best Price, Fast Delivery, Best Serves"Â to make all of our old and new customers satisfied.Â
Our Advantages
1. Advanced producing equipment.
2. Strict requirement for the raw material
3. Complete&perfect process flow
4. Good quality of each batch of the product
5. Different grades of price for different quality

FAQ
Q: Why do we choose your company?
A: We always insist quality first. We have our bearing factory, therefore we have advantage in quality control and price of one way clutch bearing.
Â
Q:What is the delivery time?
A: Most of the bearing we have stock. For small quantity, we will arrange delivery within 15 days.
Â
Q: What is your payment term?
A: Our payment term include L/C, T/T, Western Union, Paypal etc.
Â
Q: Can you send bearing samples first?
A: Yes, we can send bearing samples of one way clutch bearing to check quality first.

If you have any needs,pls contact me at any time!
3inch decking sheet are also used for decking sheet.Decking sheet is with easy operation.Material thickness 0.8-1.2mm.With embossed rollers to make sheet stronger with concerate.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously

3 Inch Decking Sheet Forming Machine
3 Inch Decking Sheet Forming Machine,Floor Tile Making Machine,Aluminum Trapezoidal,Roll Panel Forming Machine
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com

Model	Torque Capacity (N@m)	Drag Torque (N@m)	Max. Overrunning (r/min)		Max. Indexing (cycle/min)	BoreÂ Â Size		A	B	C	PCD	E
Model	Torque Capacity (N@m)	Drag Torque (N@m)	InnerÂ Â Race	OuterÂ Â Race	Max. Indexing (cycle/min)	Dia. (H7)	Keyway	A	(h7)	C	D	E
MGÂ 300 MIÂ Â 300	314	0.23 0.31	2800 50	900 _	_ 300	19	5x2	63	77	60	66	10.4
MGÂ Â 400 MIÂ Â Â Â 400	539	0.29 0.38	2600 50	800 _	_ 300	22	5x2	70	88	67	73	10.7
MGÂ Â 500 MIÂ Â Â 500	1620	0.51 0.68	2400 50	800 _	_ 300	31.5	7x3	89	108	86	92	12.3
MGÂ Â 600 MIÂ Â Â 600	3140	0.85 1.54	2100 30	700 _	_ 300	50	12x3.5	95	136	92	120	12.8
MGÂ Â 700 MIÂ Â Â 700	5880	1.70 2.63	1500 30	500 _	_ 300	70	18x6	127	180	124	160	19.8
MGÂ Â 750 MIÂ Â Â 750	9500	3.43 4.12	1800 30	600 _	_ 300	85	24x6	153	200	150	175	75
MGÂ Â 800 MIÂ Â Â 800	17600	5.39 8.33	1300 20	475 _	_ 300	110	28x7	158	250	155	220	77.5
MGÂ Â 900 MIÂ Â Â 900	24500	6.77 9.41	1200 20	400 _	_ 300	135	35x9	165	300	160	265	80
MGÂ Â 1000 MIÂ Â Â 1000	33800	8.14 12.74	1200 20	325 _	_ 300	160	38x10	188	370	180	325	90
MGÂ Â 1100 MIÂ Â Â Â 1100	78400	15.00 22.15	350 20	_ _	_ 150	185	45x14	260	470	250	415	125
MGÂ Â 1200 MIÂ Â Â Â 1200	95100	17.64 27.54	300 20	_ _	_ 150	200	45x14	260	500	250	440	125
MGÂ Â 1300 MIÂ Â Â Â 1300	176000	18.72 28.13	250 20	_ _	_ 150	250	56x17.5	280	600	260	530	130