The General Administration of Quality Supervision, Inspection, and Quarantine of the People's Republic of China (Q&A) [2015] No. Product Examination Department: In order to implement the spirit of the "Opinions of the General Administration of Quality Supervision, Inspection and Quarantine on Deepening the Reform of Industrial Product Licensing System" (Quality Inspection and Supervision [2015] No.364), we have further promoted the reform of the production license system and now further optimize production licenses. The relevant work notice of the approval process is as follows: 1.Comprehensively reducing the time limit for the examination and approval of production licenses to further shorten the time limit for administrative examination and approval, and complete the examination and approval of production licenses within 30 working days. Each provincial quality and technical supervision department shall submit the application materials of enterprises within 5 days from the date of acceptance of the application of the enterprises. The organization unit shall be responsible for organizing the examination by the product review department. The product review department shall complete the on-site verification of the company within 15 days from the date of accepting the application of the enterprise and carry out on-site verification of the enterprise according to the relevant provisions of the product license implementation rules for production licenses, and the application and review of the enterprise. The materials are collected and reviewed and submitted to the National License Examination Center; the provincial-level quality and technical supervision departments shall organize the review. The provincial-level quality and technology supervision department shall complete the on-site inspection and report the relevant materials within 15 days from the date of acceptance of the enterprise application. To the product review department, the product review department shall complete the review and review of the company's materials within 20 days from the date of acceptance of the enterprise application, and submit the enterprise materials to the National Production License Examination Center; the National Production License Examination Center will accept the application from the enterprise. The review of the submitted materials shall be completed and reported to the General Administration of Administration within 25 days from the date of the inspection; Agency accepting the application of the enterprise within 30 days from the date of the decision whether to grant permission or not permission. 2. Simplify the processing of production licenses In order to solve the problems of difficulty in applying for production licenses and difficult handling of applications, the requirements for processing links are greatly simplified. When companies apply for production licenses, they only need to submit copies of business licenses that are compatible with their production activities. Application for product production license, company's self-commitment in accordance with production license requirements or commitment letter of the company's production conditions has not changed, production of iron and steel, cement, etc. related to industrial policy should also submit project approval documents, Ministry of Industry and Information Technology and national development If the application materials meet the requirements, the provincial quality and technical supervision department must make a decision on whether to accept or reject the application within five working days from the date of application. The requirements for environmental protection, land, and other preconditions required by the implementation rules of the production license shall be checked by the field inspection team at the company's site and copied and reported. If the corresponding materials cannot be provided, they shall be handled as disapproved. Third, the improvement of corporate review methods For the production license expires after the expiration of the validity period of the enterprise, if the production address, production capacity, important production processes and technology, key production equipment and inspection equipment, compared with the time of the company's legal entity did not change, the company is When the application is submitted, the commitment letter for the production condition with the official seal is not changed. After the provincial responsible for the production license, the post-examination regulatory department confirms and seals the seal, which can be exempted from on-site verification. The company independently selects a qualified inspection agency to inspect the product. After reviewing the organization's application materials and issuing an inspection report, the organization unit submitted the approval according to the procedure. 4. Optimize the product inspection process The same unit product produced by the company is qualified for product quality supervision and inspection at the provincial level and above within 6 months. When the application for the production license expires, the company can submit corresponding product to the provincial quality and technical supervision department. If supervision and spot check inspection reports are verified on the spot or are in compliance with the conditions for exemption from on-site inspection, certification inspection will no longer be carried out. The inspection organization unit shall submit approvals in accordance with the procedures after receiving enterprise application materials and product quality supervision and spot checks. If it is necessary to carry out certification inspection of production license products, the enterprise may independently choose to carry out product inspection before on-site verification or on-site verification according to operating conditions. If the company chooses to carry out product certification inspection prior to field verification and is required to carry out product certification inspection from field verification, the enterprise shall, after the application is accepted, seal the sample (including sample preparation) in accordance with the requirements of the implementation rules and send it to them, and independently entrust the certification inspection. The agency conducts product inspections. The local municipal or above quality and technical supervision departments may send personnel to supervise according to the supervision of the enterprise product quality classification. The company is responsible for the authenticity and accuracy of the samples. The issuance inspection agency shall carry out product inspection and issue an inspection report in accordance with the provisions of the product implementation rules; in the case of on-site verification, the enterprise shall provide the product inspection certificate and will not repeat the inspection. If an enterprise chooses to carry out product inspection after field verification, it shall carry out its work in accordance with the regulations. V. Relevant requirements (1) Quality and technical supervision departments and product review departments at all levels must attach great importance, and earnestly carry out relevant work in accordance with the "Opinions of the General Administration of Quality Supervision, Inspection and Quarantine on Deepening the Reform of Industrial Product Licensing System" and the time limit for compression, optimization of procedures, etc. The relevant requirements are implemented. (2) This notice is the specific requirements and requirements for the production license approval process for the issuance of certification products by the AQSIQ. The products of the provincial-level quality and technical supervision department responsible for approving and issuing certifications can be referred to for implementation. If there are any further measures, please report to the General Administration of Administration. Filing. (3) All units should have the courage to practice and actively explore in the reform work, pay attention to finding problems, summing up experiences and accumulating data. Before the end of November 2015, provincial-level quality and technical supervision departments and product review departments shall report quantifiable work results, problems found and recommendations to the Supervision Department of the State Administration of Taxation. (4) The time limit specified in this notice shall be calculated on the working day and shall not include product inspections and the time for delivery of corporate materials. The procedures and requirements stipulated in this notice shall be implemented from October 1, 2015. AQSIQ September 2, 2015 Hard Parts For Automobile Maintenance CHANGGE FUKANG MACHINERY ACCESSORIES CO. ,LTD , https://www.fkcasting.com