An electric mountain bike,also known as an e-MTB,is a type of mountain bike that is equipped with an electric motor and abattery.The electric motor provides assistance to the rider when pedaling,making it easier to climb hills and traverse rough terrain.EMTBs are designed to be rugged and durable with features such as full suspension,wide tires, and powerful brakes.They are also equipped with a range of electronic components,including a control unit that allows the rider to adjust the level of assistance provided by the motor.One of the main advantages of an e-MTB is that it allows riders to tackle more challenging terrain and cover greater distances than they would be able to on a traditional mountain bike. Thismakes makes it a popular choice for riders who want to explore new trails or push themselves to new limits.However, e-MTBs are also controversial, with some traditionalists arguing that they take away from the physical challenge and purity of mountain biking.Despite this, the popularity of e-MTBs continues to grow, with many riders embracing the technology and the new opportunities it provides. Electric Mountain Bike,Ncm E Bikes,Giant Electric Mountain Bike Ejoysport Technology (SuZhou)Co.,LTD , https://www.yqejoysport.com
1. From the perspective of development technology, the heating principle of electrothermal film is complex and the technology is not mature. The diaphragm ink will show obvious aging within 10 years and the use effect will be greatly reduced. This is also one of the reasons for the gradual reduction of electrothermal films in foreign countries. The advantages of long-fibre carbon fiber heating and heating cables are mature technology, long service life, and stable performance. The application history of over 50 years abroad is still in use.
2, from the installation point of view, each piece of electric heating film must be connected with the two power supply wires, not only the line connector, wire connectors easy to aging, there are problems, and these connectors are manually crimped in the field, the level of requirements of the installation staff Higher. Heating cable is the entire cable, only one connector, less failure points, used to make floor heating material performance and stability.
3, from the thickness of view, the electric film is relatively thin, large area, can be on the wall, on the ceiling, the second decoration laid under the floor, suitable for tile, playing the keel is more trouble. Filament carbon fiber heating cable is thick, generally used for floor heating, buried in underground concrete and floor keel.
4. From a safety point of view, electrothermal membranes are sometimes thin at the installation level, and it is inconvenient to install temperature limiters, which can lead to high membrane temperatures and cause safety accidents. The limited temperature device of the heating cable thermostat controls the floor heating temperature. Even if the thermostat does not measure the temperature properly, the temperature of the system will not be too high.
5, from the actual heat load, like the bathroom needs 150W/? The installation of power, electric film can not be laid. In each room where the heat load is different, the carbon fiber floor heating cable can adjust the power by adjusting the cable cable density, and the electric film adjustment range is relatively small.
6, from the laying point of view, electric film due to too many joints, poor water resistance, can not lay the bathroom. Carbon fiber heating and heating cables do not have this problem, and bathroom floor heating is more comfortable.
Electric film and heating cable which is better
Electric heating film and heating cable are electric floor heating, then which of the two home heating methods is better? The following Kunming Zhituo technology gives you the characteristics of contrasting thermal film and heating cable for your reference.