Introduction: WGJ series I-beam bending machine, alias is also called cold bending machine, I-beam bending machine, channel steel bending machine, I-beam cold bending machine This I-beam bending machine is of mechanical type, hydraulic type and numerical control type. Each has its own characteristics: hydraulic type adopts hydraulic transmission, which has stable transmission, high pressure, accurate positioning, high processing precision, and processing. The speed is greatly improved and other features; mechanical type, it is to change the original hydraulic system to the jack system, in order to facilitate transportation and handling under complex conditions, the volume and weight have also been adjusted, the whole small and exquisite, the function is Increased unabated, its speed can be adjusted through a continuously variable transmission, convenient and reliable;
The camping chair is a lightweight and stackable chair, which is convenient to move and saves space. lightweight camping chair,folding camping chair,big camping chair,double camping chair,rocking chair Ningbo Autrends International Trade Co., Ltd. , https://www.zjouterlead.com
CNC curved arching machine has three obvious features:
1) Control: PLC program controller is used to automatically read data from the full hydraulic system;
2) Operation: unlimited feeding, can be advanced or retracted, the cylinder can be automatically positioned without manual measurement, automatic bending radius reading;
3) Security: Double automatic shutdown system, automatic shutdown at the specified size, infrared control system, automatic shutdown when there is no material.
In fact, whether they are mechanical type, hydraulic type, or numerical control type, they are also applied to tunnels, subways, hydropower stations, underground caverns, etc. I-beams, channel steel bending.
Correct operation of I-beam bending machine
1. The required cold-formed steel is pushed between the two driving rollers of the cold bending machine by the door bracket of the auxiliary system;
2. Start the hydraulic system of the cold bending machine so that the hydraulic cylinder pushes the dovetail groove and the cold bending roller cold-pressed steel;
3. When the arc required for the design is reached, the hydraulic system of the cold bending machine is turned off, the drive system of the equipment is started, the active roller is rotated, and the type steel is driven by friction to move forward steadily and slowly so as to realize continuous cold bending operation;
4. At the end of cold bending, the hydraulic system of the cold bending machine is started while the drive system of the equipment is turned off. The cold-formed steel is placed on the door bracket of the auxiliary system.
I-steel bending machine maintenance:
Curved arch machine in daily life needs to do a full range of maintenance, only the maintenance is good, in order to ensure the normal operation of the equipment, then we need how to maintain, here's a brief introduction to its maintenance precautions:
1. Before use, you must first perform a no-load trial to understand the operation buttons and limit the technology.
2. Check the lubrication of each component before use and refuel when necessary.
3, carefully understand the instructions, in strict accordance with the instructions for use.
4. Clean up the residue in time during use to avoid affecting the use.
5. Do not place anything on the surface of the machine and its surroundings during operation to prevent accidents.
6. Abnormal conditions found during use must be shut down, and the operation can only be continued after clearing the fault.
7. During operation, if you need to reverse, you must first stop, and then reverse the work.
Originally used for military purposes. Commonly used in various training institutions, schools at all levels,
public places, hospitals, restaurants, hotels, companies, families, and other places. It is mainly composed
of thickened steel pipe and Oxford cloth. The surface of the steel pipe is sprayed with plastic treatment,
which is rust-proof and beautiful. Moreover, the important parts of the force are treated with process
mechanics, and the bearing capacity is greatly enhanced. Oxford cloth specifications are mainly 600D
or 800D, and most folding beds use a double-layer cloth structure, which improves the service life and
comfort of the seat surface. The folding link parts are linked with galvanized rivets and original plastic
parts, which are added according to the characteristics of different products, such as the design of the
leaking cup net, the operation panel, the storage bag, the footrest, and the sun visor. The service life
of the seat surface is no less than that of the plastic injection seat surface, and it is more convenient to
carry. It is a camping chair often used for home and outdoor leisure.